How to wire your own ethernet

How to wire your own ethernet

For multi-story homes you may have to get creative. Check that the jacket is fitted right against the stop of the plug. Outside could be an option, or through an old laundry chute. Happy crimping! Place the cable in this slot, gently squeeze the crimping tool, and rotate it to cut all the way around the jacket. Check the color orientation, check that the crimped connection is not about to come apart, and check to see if the wires are flat against the front of the plug. But the main reason those strands are there is so that you can pull them down to cut away even more of the outer jacket. What is a good location for distribution? Step 2: Required Tools and Materials and Costs Advertisement Your tools and materials and costs can vary a lot based on your needs and what you already have. Unwind and pair the similar colors. Having cable TV in each of these locations, it seemed logical to treat the network the same way. Spread, untwist the pairs, and arrange the wires in the order of the desired cable end. The wires are too long. Once the connector is all the way in, squeeze down on the tool to crimp the connector. A view from the top.

When you get the length you need, simply cut the cable with your wire cutters or scissors. Odd numbered pins are always striped, even numbered pins are always solid colored.

ethernet cable pinout

Note the position of the blue plastic sleeve. Be extra careful not to nick the wires, otherwise you will need to start over.

ethernet cable connector

Looking at the RJ with the clip facing away from you, Brown is always on the right, and pin 1 is on the left. For single floor homes with a basement, the basement may be the best path. Unwind and pair the similar colors.

how to make ethernet cable

Flatten and insure there are no spaces between wires.

Rated 5/10 based on 49 review
Download
Ethernet Cable Color Coding Diagram